ECHOtape

RE-T6703
Double Sided Repulpable Tape for Manual Splicing of Tissue Paper

RE-T6703 is a 4.1 mils repulpable light blue tape carrier, coated on both sides with resin adhesive. White stiff bi-siliconized repulpable easy release liner.

Application

  • Recommended for permanent overlap manual splices of tissue, cigarette paper and very light uncoated papers on reelers and winders.

Storage & Usage Conditions

Store tape in its original packaging away from direct sunlight and in a cool and dry area. For optimum performance, tape should be used within 12 months of date of shipment. Tape works best when applied to a surface that is clean, dry and free of grease, oil or other contaminants.

Sizes

Please call for sizes and availability

Technical Data

Total Thickness .105 mm (4.1 mils)
Adhesion Wood Free Paper: 44.8 oz/in / Steel Panel: 35.8 oz/in
Shear Adhesion at 60°C 78.4 N.(2.5cm)²
Tack 10 cm

The information cited is in good faith and has been established from sources held to be secure and reliable. The values listed are typical properties. Individual rolls may vary slightly from these values. All ECHOtape products are warranted to be free of defects at time of shipment. Many factors can affect the use and performance of a product in a particular application and the user must, by test or otherwise, determine suitability for purpose; Edelstein makes no representation or warranty, express or implied, concerning any application and usage if its products. If ECHOtape product is proved to be defective, the exclusive remedy, shall be for Edelstein to replace the defective product. ECHOtape shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including but not limited to, contract, negligence, warranty or strict liability.