February 6, 2018|

Butyl Tapes vs Acrylic Tapes: Know the Difference

  • Butyl Tapes vs Acrylic Tapes: Know the Difference | ECHOtape

Choosing the Right Adhesive Tape | via TAPED, the ECHOtape blogIn a contractor’s toolbox, nothing beats adhesive tape for versatility, portability, and ease of use.  And as you can imagine there is quite a spectrum of adhesive specialty tapes on the market.

Sometimes you want adhesive tape to be modestly sticky and easily reversed—like a sticky note. But when it comes to residential or commercial construction, for example, we want that adhesion to be very strong and darn near irreversible. High-performance building contractors also want adhesive tape to be highly durable, withstanding temperature extremes and volatile moisture conditions; adhere to a wide variety of substrates; and tolerate the dust and dirt found on the surfaces of the building materials or the job site.

What Are the Types of Adhesives Used in Tape?

That said, there are four basic types of adhesives used in tape all of which differ in characteristics as well as cost.

Rubber: Adhesives which are based on natural or synthetic rubbers and formulated with tackifying resins, oils, and anti-oxidants. Rubber is often the most cost-effective adhesive and offers quick stick capability. Rubber adhesive is not recommended for high heat applications. It also does not perform well in colder temperatures, especially if it reaches below the freezing point of 32°Fahrenheit.

Butyl: A specialized rubber adhesive system, butyl was developed to augment traditional rubber adhesives because they are less temperature-sensitive and maintain their tackiness at much lower temperatures than natural rubber.  And while butyl sticks better to more substrates, butyl is also more expensive.

Acrylic:  Acrylic adhesives can be water-based, solvent-based, or “solid.” Water-based adhesives are the least expensive of the three and generally do not bond to as wide a variety of substrates as solvent-based ones. Solid acrylic adhesives can form the strongest adhesive bonds at a wide range of temperatures and even achieve adhesion to damp or wet substrates. Solid acrylic adhesives are also VOC-free, and the absence of any solvents means little to no embrittlement of the tapes over time. Both water- and solvent-based acrylics are similar in cost to butyl rubber tapes; however acrylic adhesives typically develop a stronger bond than the traditional Rubber adhesive and are able to take higher temperatures

Silicone: Formulated with Silicone polymers and the only adhesive that will bond well with silicone substrates. Silicone adhesives are relatively expensive and have a very low initial tack, but can withstand higher temperatures than both Rubber and Acrylic adhesive

So, which is the best fit for your application?  Well, for builders and professional contractors, it really comes down to butyl and acrylic. So let’s take a closer look at these two popular adhesive technologies.

What Is Butyl Tape, Exactly?

Butyl tape is an example of a synthetic rubber adhesive. It’s a solvent-based adhesive that is formulated in the lab instead of coming from a rubber tree. All types of rubber adhesive are thermoplastic, so exposure to high heat will soften the adhesive and impact its effectiveness. However, butyl adhesives are formulated to be less sensitive to temperature variations. They stay more flexible in cold weather and more stable in high temperatures than natural rubber adhesives. Because butyl tapes are extremely durable,  with have good flex properties, they are often used in applications where an airtight bond is required. In fact, most butyl tapes also come with a liner since the adhesive system is aggressive and forms a permanent bond to the surface it sticks to – even if that surface is itself!

When Are The Advantages of Butyl Tapes?  

Advantages:

  • High initial tack­—has a more aggressive hold on contact than acrylic adhesives
  • Has a high level of adhesion because it bonds to a huge variety of surfaces
  • Less expensive than acrylic adhesive
  • Impermeable to air
  • Waterproof so it works well in situations where water is a factor

Disadvantages:

  • Even though butyl adhesives are less sensitive to temperature variations they still cannot match the range or performance of acrylic adhesives.
  • Does not hold up over time to direct exposure to UV light or chemicals
  • Susceptible to oxidation and may darken or discolor

Ideal for:

  • Seaming and flashing windows and doors
  • Repairing leaks

What Is Acrylic Tape, Exactly?

Acrylic tapes are either water- or solvent-based. They are created by crosslinking monomers to create polymers with specific properties. Acrylic adhesives are naturally tacky so they don’t require as many additives during the manufacturing process as rubber adhesives. Offering a good balance of adhesion, shear and tack, tapes with acrylic adhesive systems are resistant to thermal and UV degradation. They can be used on many surfaces and perform in a much wider application temperature range – typically anywhere from -30°F to 300°F.  The only real downside is the cost; these tapes cost a bit more than the rubber or asphaltic tapes. Builders often use acrylic tapes to completely seal a home, creating an airtight envelope.

When Are The Advantages to Acrylic Tapes?

Advantages:

  • Offers superior durability and longevity on polar surfaces (i.e. metal, glass, and polycarbonates)
  • Will not break down when exposed to extreme temperatures, UV light, chemicals or oxidation
  • Color stable and resistant to aging (will remain clear and not yellow)
  • Have a high level of cohesion (ability to stick to itself)
  • Are considered “greener” or more environmentally friendly in that do not off-gas or pollute landfills

Disadvantages:

  • Needs time (usually 24-72 hours) to fully set
  • Poor adhesion to low energy or non-polar surfaces
  • Impermeable to air only on polar surfaces
  • More expensive than butyl adhesives

Ideal for:

  • Seaming vapor barriers, house wraps, and rigid foam insulation

As always, the adhesive compound is just one factor that should be taken into account when selecting the right tape for the right application.  Characteristics like backing, strength, and permeability, as well as environmental conditions and substrate, are a few other factors that can impact the job, and ultimately, its success.  You can find more information about adhesive tape by visiting our post  The Complete Technical Guide to Adhesive Tape.

Still not sure which tape is right for your application? Contact us.  We love a good tape challenge!

To learn more about ECHOtape and how we help customers find the right tape for their job, you can read about us here.

Related Posts